Cart

[custom_mini_cart]

Solar Panel Testing & Reuse Certification

Testing & reuse certification

Used Solar Panel Testing & Reuse Certification

Before a panel is recycled, we check whether it can be reused. Each panel is tested with an I-V curve tracer and graded pass or fail. Large lots are certified by statistical sampling. Every certificate can be checked online by anyone, using its reference.

  • I-V curve testing, corrected for light conditions
  • Batch certification under ISO 2859-1 (AQL 2.5)
  • Certificates and manifests anyone can verify online
  • Built for UK light conditions and field testing
Waste Carrier CBDU579018T11 EXP/HP3743JYWEEE RegisteredEngland, Wales & Scotland
Prefer to talk? 0330 223 7062
Get panels tested
Tell us about the panels. We'll confirm the testing approach and quote.
What do you need?

Commercial enquiries only. We reply within 24 hours.

Quick answer

How are used solar panels tested for reuse?

A used panel is tested by measuring its current-voltage (I-V) curve under real light, then comparing the result with the manufacturer’s datasheet. That shows whether the panel still produces close to its rated output and whether it has faults such as failed bypass diodes or cell damage. Every panel is also checked visually for cracks, delamination and hot spots.

Olital grades each panel pass or fail with corrections for irradiance. For large consignments, we certify a statistically sampled batch. The results are recorded on certificates that buyers, insurers and auditors can verify online.

Testing options

Three ways we certify panels

→
Single-panel functional testing
Each panel’s I-V curve is measured and its open-circuit voltage corrected for irradiance. Faults are flagged and the panel is graded pass or fail. A power-rated tier uses a reference cell to measure the light.
→
Batch certification
Every panel is screened visually. A random sample is then tested under ISO 2859-1 at AQL 2.5, and the sample selection is recorded. A failed batch can’t simply be re-sampled.
→
Bulk field testing
For 200+ panels, testing can happen where the panels are. Mixed-model lots are matched to each nameplate’s datasheet automatically.
Why it matters

A certificate turns used panels into stock someone will buy

Buyers of second-life panels need evidence, not a promise. A pass/fail result tied to the panel’s serial number, the test method and the light conditions gives them that evidence.

For the seller, it’s the difference between paying for recycling and recovering value. Panels that pass can be resold for reuse. Panels that fail are recycled with full paperwork.

  • 01
    Serial-level records
    Results are tied to individual panels.
  • 02
    Method recorded
    Each result notes how and under what conditions it was measured.
  • 03
    Public verification
    Certificates and batch manifests have a reference anyone can check online.
  • 04
    PDF certificates and manifests
    Ready to send to buyers, insurers or auditors.
Process

How a test run works

Step 01
Screen
Every panel is inspected for visible damage. Failures go straight to recycling.
Step 02
Measure
The panel’s serial is scanned and its I-V curve recorded against the datasheet.
Step 03
Grade
Each panel, or the sampled batch, is graded pass or fail.
Step 04
Certify
A certificate and manifest are issued with a public verification reference.
FAQs

Frequently asked questions

We test commercial quantities, usually 50 panels or more. For a single home panel, a local MCS installer is the right contact.
A pass means the panel’s output and electrical behaviour are within acceptable limits of its datasheet rating, corrected for the light conditions at the time of testing, and that it has no visible damage.
Every panel is visually screened. A random sample is then functionally tested using ISO 2859-1 at AQL 2.5. If the sample passes, the batch is certified. The selection method is recorded, and a failed batch can’t simply be re-sampled to get a pass.
Yes. Every certificate and batch manifest has a reference that anyone can check on our public verification page, without logging in.
They’re recycled through approved facilities, with the same Waste Transfer Note and completion report as any other collection.

Have panels that might still work?

Tell us the quantity, make and model. We’ll confirm the testing approach and what reuse could be worth.

0330 223 7062
Monday to Friday, 8am–6pm
Get My Quote →
Scroll to Top

Cart

[custom_mini_cart]